>?
Available monitor commands are:
 ? [command]
 h [command]
 mb [StartAddr [Count [Filler]]]
 mh [StartAddr [Count [Filler]]]
 mw [StartAddr [Count [Filler]]]
 ppdl [pathname]
 l [pathname]
 lr [pathname]
 ram start len loop 
 ir_rc_test [times] [gap]
 BTRouter [speed]
 emapi [MEM] [ATT] [IO] : Enable the eMapi Router
 sd2r 
 ram2sd 
 sd2ram 
 ruu 
 map







>h ram2sd
Usage:

 ram2sd 

 Backup image to SD card command
r2sd diag : Backup diagnostic image from RAM to SD card.






>ram2sd diag
Backup diagnostic image from RAM to SD card.
***** user area size = 0x3BA00000 Bytes

Now we do not support this function.
>> 1000341504(0x3BA00000) 512(0x00000200) 1953792(0x001DD000)

R2SDBackup()--dwImgCheckSum = 0x3204239F
WriteDataToSDCard() dwTotalBlock=200
ReadDataFromSDCard() dwTotalBlock=200







>map

Uncached_Virtual, Physical,   MB  
-----------------------------------------------------------------------------
   0xA0000000,     0x00000000,  64   ;FLASH ROM Bank,CS#0
   0xAC000000,     0xA8000000,  64   ;SDRAM Bank0
   0xB0000000,     0xAC000000,  64   ;SDRAM Bank1

   0xB4000000,     0x20000000,   2   ;PCMCIA S0 I/O
   0xB4200000,     0x28000000,   8   ;PCMCIA S0 ATT
   0xB4A00000,     0x2C000000,  64   ;PCMCIA S0 CMN
   0xB8A00000,     0x30000000,   2   ;PCMCIA S1 I/O
   0xB8C00000,     0x38000000,   8   ;PCMCIA S1 ATT
   0xB9400000,     0x3C000000,  64   ;PCMCIA S1 CMN
   0xBD400000,     0xE0000000,   4   ;Zero Bank 
   0xA8000000,     0x40000000,  32   ;Peripheral Controller
   0xAA000000,     0x44000000,   1   ;LCD Controller  
   0xAA100000,     0x48000000,   1   ;Memory Controller
   0xAA200000,     0x4C000000,   1   ;USB Host    
   0xAA300000,     0x50000000,   1   ;Camera Interface
   0xAA400000,     0x58000000,   1   ;Internal Memory Control 
   0xAA500000,     0x5C000000,   1   ;Internal Memort Storage CS4# 
   0xBDB00000,     0x10000000,   1   ;CPLD chip CS5# 
   0xBDC00000,     0x14000000,   1   ;DBG LED REGISTER
   0xBDD00000,     0x15000000,   1   ;DBG LAN MEM REGISTER
   0xBDE00000,     0x15100000,   1   ;DBG LAN I/O REGISTER
   0xBDF00000,     0x16000000,   1   ;DBG PPSH REGISTER
   0x00000000,     0x00000000,   0   ;End of Table (MB MUST BE ZERO!)